Skip to content

Product Independently confirmed4 publishers 3 min read Published Updated

Bluesky's new opt-out asks every AT Proto app to keep your posts out of recommendations

The account-level toggle keeps a user's posts out of Bluesky's Discover feed for people who do not follow them, but honoring it elsewhere on the protocol is voluntary, which leaves reach as the control on offer.

The Product Desk

Send a correction

What happened

  • Bluesky introduced an algorithmic opt-out on Thursday that stops a user's posts from appearing in the app's main Discover feed for people who do not already follow them.
  • The switch is an account-level control rather than a per-post filter, so turning it on covers everything the account posts, not the one item causing trouble.
  • Bluesky records the preference on the account so it travels to other apps built on AT Proto, which can read the flag and still decide for themselves whether to respect it.
  • Unlike X and other platforms, Bluesky does not allow private accounts, so there is no followers-only mode to fall back on.
  • The company says the feature does not make posts private and that support for private data at the protocol level is still being rolled out.

Why it matters

  • Who's exposed exposure The people with the strongest reason to enable this get a preference that any non-Bluesky client on the protocol can read and then route around at its own discretion.
  • What it limits constraint A comms or community account cannot be quiet for staff replies and loud for launch posts on the same handle, which pushes that use case toward running two identities.
  • What it sets up precedent Shipping a control whose own label says "ask" sets a useful template for open-protocol products: put the limit of the promise in the interface, not in a support article.

The moment someone goes looking for this setting tends to arrive late. A reply written for followers has been lifted in front of an audience it was never meant for, and the author starts opening menus. Bluesky says the toggle can take up to an hour to fully take effect [9]. Paired with its all-or-nothing scope, that makes it a posture you set before trouble rather than a brake on a post already moving [14].

What the switch adjusts is ranking, not reachability. Posts on the network are public by default and Discover can currently surface any of them [5], so opting out narrows who gets served your posts in one feed while leaving them readable to anyone who opens your profile. That feed is worth something. Engadget calls Discover one of the main places people on Bluesky find accounts they do not already follow [12], which means the price of the setting is the post you did want to travel.

The most useful thing on the screen is the wording of the checkbox: "ask apps to hide my posts from algorithmic recommendations" [3]. The verb is doing real work. Guaranteed enforcement covers one ranker, Bluesky's own [13], and Engadget notes that posts can still turn up in other algorithmically curated feeds and services built on the AT Protocol [8]. Engadget also reads fully private accounts as unlikely to ever arrive on Bluesky [15], which leaves reach as the thing users are actually handed.

Teams tell themselves that users who worry about reach want fewer impressions. What users do is narrower: they post to the audience they believe they have, and they go quiet when strangers show up in the replies. Bluesky describes the change as one of a few updates meant to give people more control over their experience and help them find their people [10], which is a vaguer claim than "privacy setting" and a more accurate one.

Two axes are enough to grade any reach control a vendor ships you. Where enforcement lives: inside the code that does the ranking, or in the goodwill of whoever reads the flag. What granularity it costs: the individual post, or the whole account. This one sits app-enforced and account-wide, the cheap corner on both counts, which is close to the limit of what a public-by-default protocol can enforce today.

So the rollout answer for Monday has two halves. If your users need per-post control, the honest advice is two handles, one for the work that should travel and one for everything else. If they need a guarantee, the honest advice is that the guarantee stops where Bluesky's ranking code stops [13], and anything downstream is a courtesy. In a month, the number worth pulling is whether the people who switched it on are still posting as often as they were, which tells you more about whether the setting worked than any count of Discover impressions.

What to watch

  • Whether any major third-party AT Proto client states publicly that it honors the account-level flag, and whether Bluesky publishes a list.
  • Bluesky's protocol-level private data work landing, which would turn a discoverability control into an access control.
  • Whether a per-post version of the opt-out follows, or the account-wide toggle stays the only granularity offered.

Clarity's read

What the record supports and how the coverage leans. The claims behind it follow.

Reality

Evidence78
Adoption
Not scored
Hype gap+10
Incentives30
Confidence76

Perspective Coverage

4 publishers
Builder
Builder 27%
Operator
Operator 54%
Investor
Investor 19%
Why these scores

Claim ledger

Ranked by verification strength, evidence, and original report placement.

  1. [1]

    Bluesky on Thursday introduced an algorithmic opt-out feature that allows users to stop their posts from appearing in the app's main Discover feed, and that prevents posts being shown to people who do not already follow them.

    Reported Supported Source: TechCrunchView cited source
  2. [2]

    The opt-out is toggled on via a new option in the app's Privacy and Security settings.

    Reported SupportedView cited source
  3. [3]

    The setting's checkbox is labelled "ask apps to hide my posts from algorithmic recommendations".

    Reported Supported Source: EngadgetView cited source
  4. [4]

    The preference is recorded at the account level rather than only inside Bluesky's app, so it travels with the user to other apps powered by AT Proto; those apps have access to the information but still have to choose whether to respect it.

    Reported Supported Source: TechCrunchView cited source
  5. [5]

    Posts on Bluesky's network are public by default, and the Discover feed can currently surface any post on the network.

    Reported SupportedView cited source
  6. [6]

    The change is not a way to make posts private; Bluesky says it is still working on rolling out support for private data at the protocol level.

    Reported Supported Source: TechCrunchView cited source
  7. [7]

    Bluesky, unlike X and other platforms, does not allow people to have private accounts.

    Reported Supported Source: EngadgetView cited source
  8. [8]

    Even with the new box checked, there is still a chance a user's posts could appear in other algorithmically curated feeds or services that use the AT Protocol.

    Reported Supported Source: EngadgetView cited source
  9. [9]

    Bluesky says the change can take up to an hour to fully take effect.

    Reported Supported Source: Bluesky, via TechCrunchView cited source
  10. [10]

    Bluesky said the change is "one of a few updates we're working on to give you more control over your experience and help you find your people."

    Reported Supported Source: Bluesky, via EngadgetView cited source
  11. [11]

    The tool is an account-level control, not a per-post filter, so enabling it prevents all of a user's posts from being shown in Discover to people who do not already follow them.

    Reported Supported Source: EngadgetView cited source
  12. [12]

    Bluesky's Discover feed is still one of the main places users find posts from accounts they do not follow.

    Reported Supported Source: EngadgetView cited source
  13. [13]

    Guaranteed enforcement of the flag extends to exactly one ranking system, Bluesky's own Discover feed; for every other reader on the protocol it is a request.

    Derived Supported
  14. [14]

    Because the setting takes up to an hour to apply and covers every post on the account, it works as a standing posture rather than a way to stop a post that is already circulating.

    Derived Supported
  15. [15]

    Engadget writes that it seems unlikely Bluesky will ever support fully private accounts, while noting the company could add more privacy-protecting features.

    Reported Insufficient Source: EngadgetView cited source

Sources

4 independent publishers whose own reporting we read for this story.

  1. digitaltrends.com

    1 article · August 28, 2026

    Bluesky now has a feature to save you from accidentally going viral. I want it everywhere. - Digital Trends
  2. engadget.com

    2 articles · August 28, 2026

    Bluesky has a new setting to help you avoid accidentally going viral
  3. mashable.com

    1 article · August 28, 2026

    Bluesky will let you opt-out of going viral | Mashable
  4. techcrunch.com

    2 articles · August 28, 2026

    Bluesky adds an ‘algorithmic opt-out’ feature for those who don’t want to go viral

Topics and entities

Topics

  • Decentralized social networking
  • Algorithmic Recommendation Feeds
  • Social media privacy controls